We've been handing out recorders to encourage people to get in tune with their productive side. Like you, we don't see much use in accumulating paper in filecabinets when it can be put to work for you right on your Mac or PC desktop. Our Optix systems can convert that tree-wasting paper into valuable digital assets using scanners that boast speeds up to 180 images a minute at 200 dpi. Scan to PDF or TIFF and index your documents using custom screens you can design and deploy in minutes. Managed securely on the Optix Server at your site, employees can now find and view any of your documents in seconds.

Call us today to set up an Optix demo or to discuss your unique requirements.

And celebrate your newfound productivity by learning to play that recorder! Download a fingering chart and some simple songs here.

Recorder Tips:

1. The recorder is built with three segments. If the joint between segments is a bit loose, it can leak air which will prevent you from hitting the lowest notes. This is especially true of the "bell" segment at the bottom.

2. To fix a loose joint, twist the joint apart, then tear or cut a 1/4 inch strip of tissue paper, wrap it around the joint so it is covered with a single layer of tissue, then twist it back together. Tear off any tissue that sticks out. Alternatively, just wrap a narrow strip of tape around the joint.

3. Twist the bottom segment a bit to the left so that your pinky can reach the last hole easier. When playing, your finger must completely block a hole so air doesn't leak out.

4. Your left hand thumb covers the hole on the underside, with the first three fingers of the left hand working the top three holes (your left hand pinky hangs out in space and waves to your audience). Fingers on your right hand work the lower four holes and your right hand thumb helps hold the instrument.

5. Blow gently to hit the low notes.

6. The rod that came in the recorder box is used to remove moisture left by your breath from the inside of the recorder. Thread a piece of tissue paper into the eyelet at the end of the rod and run it in and out of the recorder a few times to dry it. This isn't really needed on a plastic recorder, but should be done on the more expensive wooden ones to prevent them from cracking.

7. Practice!

Watch for our ad in MacWorld magazine to be distributed at the MacWorld Expo in January 2009.

Visit us in booth #1944!